4 days ago · Step 3: Locate the Coolant Reservoir Most modern vehicles have a translucent plastic coolant reservoir. It is typically located near the radiator and is marked with "Max" and "Min" lines to indicate the acceptable coolant level range. Step 4: Inspect the Coolant Reservoir In this video, I show you how to check the coolant/antifreeze level of your car. This is an essential part of car maintenance; coolant levels should be check Seeing the “Check Coolant Level” warning on your dashboard is often a sign you’re about to have a very bad day. Your engine’s coolant — also known as antifreeze — is a vital fluid that keeps the engine’s temperature regulated, improving efficiency and preventing overheating that could damage the motor. Not all antifreeze is Step 1: Cool Down the Car. Turn off your car’s engine. If the car has been driven recently, let it sit for 15 to 20 minutes to cool down. The engine coolant expands once it is heated, so the liquid rises inside your engine’s coolant reservoir, providing an inexact reading if the engine is still warm. Next, open the car hood then secure it If your car is overheating, there’s a good chance you’ll find one or more of the following problems to be the cause: Leaks Leading to a Low Coolant Level. Your car’s cooling system is an assortment of components and hoses, nearly all of which can develop leaks. Leaks often lead to a low coolant level, resulting in engine overheating. To check the coolant level, Park the Jeep on level ground and open the hood. Locate the coolant reservoir, which is usually located near the radiator. The coolant level should be at or above the “Full” line on the reservoir. If the level is low, add coolant until it reaches the “Full” line. Be sure to use the correct type of coolant in p34dSM. Buy Now!New Antifreeze Coolant Tester from 1AAuto.com http://1aau.to/ib/1AXAA00048In this video, 1A Auto demonstrates how to check the coolant in a 2013 Toyo Step 1 - Locate Coolant Temperature Sensor. The coolant temperature sensor is located on the engine block under the hood. Pull the latch for the hood and open it, making sure it is secure before letting go. You will search for the sensor within the engine block itself, using a drop light if you need help to see it better. 2. Park your car on a flat, level surface and set the parking brake. Pull the brake handle up as far as it will go to make sure that the braking mechanism is fully engaged. Setting the parking brake will prevent your vehicle from rolling or shifting unexpectedly while you’re messing around under the hood. Since the check coolant light comes on every time we start the car, whether it has been sitting over night with temps in the 30's or at the grocery store with the car at operating temps. The check coolant level light comes on every start up and shutdown, even though the fluid level is above the kalt line--- even lapping at the radiator cap. Rather than open the cap on the radiator, just check to see whether the liquid reaches the "Full" line on the side of Coolant is usually red, green, blue, or yellow. If it looks colorless, looks rusty, or has things floating around in it, If the coolant has a sludgy, oily surface, immediately

how to check coolant level in car